Skip to main content

Pro Only

Powder Perfection

Powder Perfection - Step 3 Top Coat

Try the easy-to-use Powder Perfection - Step 3 Top Coat from OPI, the final step in the dipping powder process that seals in colour with brilliant shine.

Product form

Share:

Link Copied

Powder PerfectionPowder Perfection - Step 3 Top Coat
product.sticky.form.legend

Powder Perfection is a quick-applying, odour-free acrylic alternative that promotes a clean-air environment while offering gel-like shine. Top Coat is the third of three liquids used in a Powder Perfection service. The top coat seals in Powder Perfection colour with a glossy, high-shine finish. With an easy brush-on application and a colour-coded cap to help nail techs with quick identification, it will make your next manicure simpler than ever. Made in the USA.

Faster and easier application vs traditional acrylic powder. High shine finish. Chip-resistant for weeks. Unique formula makes nails feel strong and durable. Dries almost instantly, no need to light cure in a UV / LED Light. Non-damaging, soak-off wrap removal.

Brush on one coat of Powder Perfection Base Coat to a single nail, making sure to cover the entire surface of the nail evenly. Immediately, dip the finger into the Colour Powder at a 45-degree angle and tap off the excess dipping powder. Repeat on remaining fingers. With a sanitised cosmetic brush, dust off the remaining loose nail dip powder from each finger. Apply a second coat of Powder Perfection Base Coat and Colour Powder to each nail according to steps 1-3. Brush on a third coat of Powder Perfection Base Coat and dip into Clear colour Set Powder at a 45-degree angle. Dust off any remaining dipping powder. Apply one generous coat of Powder Perfection Activator, and cover the entire surface of the nail. Cap the free edge to fully seal in the powder. Wait until the dipping powder hardens. Shape and contour the nails with an EDGE 180 Grit File. Buff the nail surface with a 100 grit Buffer followed by a 220 grit Buffer to create a smooth surface. Remove excess filing dust. Apply a second coat of Powder Perfection Activator, making sure to cover the entire nail. Wait a few minutes to dry. Evenly apply one coat of Powder Perfection Top Coat using 2-3 quick brush strokes. Wait 1-2 minutes to dry. Using 2-3 brush strokes, apply a second coat of Powder Perfection Top Coat with precision. Wait 1-2 minutes to dry. Once dry, drop and massage ProSpa Nail & Cuticle Oil into cuticles.

Ethyl Cyanoacrylate, Polymethyl Methacrylate, Hydroquinone.