- Apply 1 coat of OPI GelColor Base Coat after proper nail prep. Cure for 30 seconds in the OPI LED Light.
- Apply 2 thin coats of OPI GelColor in Alpine Snow. Cure each coat for 30 seconds in the OPI LED Light.
- Apply 1 thin coat of OPI GelColor Chrome Effects No-Cleanse Top Coat. Cure for 30 seconds in the OPI LED Light.
- Vertically place a piece of thick striping tape in the center of the nail.
- Use an applicator sponge to apply OPI Chrome Effects Mixed Metals on one side of the taped area. Rub onto the nail until the Chrome Effect starts to appear.
- Use a cosmetic brush to dust off excess powder. Carefully remove the nail art tape.
- Use a 240 File to lightly file the free edge only on the area with chrome powder. Use a cosmetic brush to dust off excess powder.
- Apply 1 thin coat of OPI GelColor Chrome Effects No-Cleanse Top Coat.
- Cure for 30 seconds in the OPI LED Light.
- Prepare the surface for nail art by lightly buffing with the 280 side of the FLEX 220/280 Buffer.
- Use OPI GelColor Black Onyx to paint a straight line down the center of the nail.
- Cure for 30 seconds in the OPI LED Light.
- Use OPI GelColor Black Onyx to paint angled lines and a triangle inside the chrome area. Fill in the triangle and flash cure for 15 seconds as needed.
- Cure for 30 seconds in the OPI LED Light.
- Apply 1 thin coat of the OPI GelColor Chrome Effects No-Cleanse Top Coat.
- Cure for 30 seconds in the OPI LED Light.
