Skip to main content

Pro Only

Top & Base Coats

Powder Perfection - Brush Cleaner

Revive hardened brushes used for dipping powder service with this brush cleaner.

Product form

Share:

Link Copied

Top & Base Coats

Powder Perfection - Brush Cleaner
product.sticky.form.legend

Use OPI brush cleaner on Powder Perfection Base Coat and Top Coat brushes that have hardened over time. This brush cleaner will revive hardened brushes back to their original state. Made in the USA.

Faster and easier application vs traditional acrylic powder. High shine finish. Chip-resistant for weeks. Unique formula makes nails feel strong and durable. Dries almost instantly, no need to light cure in a UV / LED Light. Non-damaging, soak-off wrap removal.

Brush on one coat of Powder Perfection Base Coat to a single nail, making sure to cover the entire surface of the nail evenly. Immediately, dip the finger into the Color Powder at a 45 degree angle and tap off the excess dipping powder. Repeat on remaining fingers. With a sanitized cosmetic brush, dust off remaining loose nail dip powder from each finger. Apply a second coat of Powder Perfection Base Coat and Color Powder to each nail according to steps 1-3. Brush on a third coat of Powder Perfection Base Coat and dip into Clear Color Set Powder at a 45 degree angle. Dust off any remaining dipping powder. Apply one generous coat of Powder Perfection Activator, cover the entire surface of the nail. Cap the free edge to fully seal in the powder. Wait until dipping powder hardens. Shape and contour the nails with an EDGE 180 Grit File. Buff the nail surface with a 100 grit Buffer followed by a 220 grit Buffer to create smooth surface. Remove excess filing dust. Apply a second coat of Powder Perfection Activator, making sure to cover the entire nail. Wait a few minutes to dry.

INGREDIENTS: Ethyl Cyanoacrylate, Polymethyl Methacrylate, Hydroquinone.